Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Irving
Fireplace service in Irving, TX typically runs $180-$650 depending on whether you need a routine inspection, a gas-valve adjustment, or firebox repair tied to foundation movement. Our crews are dispatched from our Dallas-Fort Worth office and carry the full inventory of parts needed for same-visit repairs in Irving neighborhoods from Valley Ranch to the Heritage District. Call (972) 284-1392 and we’ll get you a written price before anyone starts.
We’ve worked Irving’s chimney stock since 2009, and there’s a pattern here you won’t find in every North Texas city. The clay soils of the Blackland Prairie push and pull on ranch-home foundations built between the 1960s and 1980s, and that stress travels straight up to the firebox floor and smoke chamber. Our Fireplace Services team documents every finding with a camera scan before recommending work. No exceptions.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Level Two Chimney Dallas Is Irving’s Preferred Fireplace Services Company
Irving homeowners have left us reviews mentioning the same thing: they booked because we show the video. Not a flashlight beam, not a verbal summary - a camera down the flue, footage they watch on our tablet, and a written price before the truck is unpacked. That’s Haven Standard Clause 4, and we’ve done it on every one of our 38,000-plus jobs.
Our response time to Irving is typically next-day or within 48 hours during sweep season, which runs September through February in this market. We know the streets around Story Road, the 1980s buildout of Valley Ranch, and the brick ranch clusters where original clay-tile liners are hitting their sixth decade of service. When you call (972) 284-1392, a live person answers - 24 hours a day, not a voicemail tree.
We’re independently owned and operated under the Haven Standard, not a franchise network. Corrine Halstead leads this company, and every technician who enters your Irving home is background-checked, uniformed, and named on your appointment text. License information is displayed on every page we publish.
Our Fireplace Services in Irving
Gas Fireplace Service
Gas fireplaces in Irving’s newer construction and converted ranch homes need annual burner inspection, thermocouple testing, and venting verification. We service HeatShield and Gelco gas components, and we carry replacement valves and pilot assemblies for common units found in Valley Ranch and Las Colinas properties. A standard gas fireplace service in Irving runs $180-$280. If we find a cracked flex line or failed gas valve, we’ll show you the leak-detector reading or the camera image before quoting repair.
Wood Burning Fireplace
Irving’s short, intense burn season means wood fireplaces here rarely reach sustained flue temperatures. The result: Stage 2 glazed creosote that homeowners don’t expect because they only light a dozen fires a year. We sweep and inspect wood-burning systems with an NFPA 211 Level 2 camera scan, document the creosote class and liner condition, and deliver a written scope and price before any work. A Level 2 inspection with sweep in Irving typically costs $280-$380.
Fireplace Insert
Valley Ranch’s 1980s planned-community buildout installed thousands of prefabricated zero-clearance fireplace inserts. Those factory flues are now reaching end-of-life, cracking at the joints, and venting into wall cavities. We replace inserts with Olympia Chimney and Famco systems sized to your existing opening, and we verify proper clearances with a camera scan of the surround. Insert replacement or upgrade in Irving runs $1,800-$3,400 installed, with a written warranty under our 365-Day Done Right Promise.
Damper Repair
In older Irving subdivisions, we regularly find dampers that were decorative from day one - permanently seized, rusted open, or missing entirely. A functional damper is what keeps conditioned air in your home and animals out of your flue. Damper repair or replacement in Irving costs $240-$520 depending on whether we can restore the original throat damper or need to install a top-sealing model. We test operation and show you the before-and-after on video.
Firebox Repair
This is where Irving’s clay soil becomes critical. The Blackland Prairie’s expansive clays heave in wet seasons and shrink in drought, and that foundation movement cracks firebox floors and separates smoke chambers from the chimney stack. We resurface fireboxes with HeatShield refractory mortar, rebuild damaged brick, and document structural separation with camera footage before recommending repair. Firebox repair in Irving typically runs $650-$1,800. We also offer a Free Second Opinion on any competitor’s written estimate for firebox work.
Before
AfterTrusted Brands We Service in Irving
We stock parts and materials from HeatShield, Gelco, Olympia Chimney, and Famco - sourced through Haven’s buying network to keep prices honest and turnaround fast. For Irving customers, that means we’re not ordering a damper assembly or refractory panel after we’ve already been to your home. We carry common replacement dampers, gas valves, and firebox refractory kits on every truck, and we can source specialty liners from DuraFlex within 24 hours if your Valley Ranch or Heritage District home needs a full liner replacement.
Common Fireplace Services Problems We See in Irving Homes
- Foundation-up firebox separation. Irving’s Blackland Prairie clay soils heave and shrink enough that our techs find structural separation at the firebox floor or smoke chamber as often as they find creosote. It’s a foundation-up problem, not just a crown-down one, which is rare in cities on sandier soils to the west.
- End-of-life prefab inserts in Valley Ranch. The 1980s zero-clearance units are cracking at factory flue joints and venting into wall cavities. Homeowners smell smoke or notice staining and assume it’s a simple creosote issue. The camera tells the real story.
- Decorative-only fireplaces with seized dampers. In older Irving subdivisions, builders installed non-functional dampers that have been stuck for 40-plus years. Animal nesting, moisture intrusion, and debris accumulate silently behind a facade that looks fine from the living room.
- Stage 2 glazed creosote from low-temperature burns. Because Irving residents light fires infrequently, flues never reach the sustained heat needed to volatilize light deposits. The result is hard, glazed creosote that builds faster than occasional users expect.
Pricing for Fireplace Services in Irving, TX
Here’s what fireplace service costs in Irving’s market:
| Service | Typical Range |
|---|---|
| Gas fireplace service (annual) | $180 - $280 |
| Wood-burning Level 2 inspection with sweep | $280 - $380 |
| Damper repair or replacement | $240 - $520 |
| Firebox repair / HeatShield resurfacing | $650 - $1,800 |
| Fireplace insert replacement (installed) | $1,800 - $3,400 |
What moves you within these ranges: accessibility of the firebox, whether we need to remove an insert to inspect behind it, and the extent of refractory damage. Every job gets a written price, written scope, and written warranty before work starts - Haven Standard Clause 1. No “call for a quote.” Call (972) 284-1392 for a free estimate.
We Also Serve Cities Near Irving
Our Fireplace Services in Irving are part of broader coverage across the Dallas-Fort Worth metro. We also dispatch to Dallas, Mesquite, Lancaster, and Grand Prairie with the same camera-scan standard and written pricing. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office; crews serve Irving locally with full parts inventory on the truck.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Irving
Yes. Unused fireplaces in Irving’s 1960s-1980s ranch homes often have permanently seized dampers, deteriorated clay-tile liners, or animal nesting that progressed for decades unseen. We find active problems in “unused” systems regularly, especially where foundation movement has cracked the firebox. Call (972) 284-1392 for a free estimate - a Level 2 camera inspection runs $280-$380 and gives you documented evidence of what’s actually in there.
Irving’s infrequent-use pattern is the culprit. North Texas residents who light only a few fires per season never reach the sustained flue temperatures that volatilize light creosote, so Stage 2 glazed deposits accumulate faster than in homes with regular burns. Fort Worth’s sandier soils and different housing stock aren’t the main variable - burn frequency and temperature are. A proper sweep removes it; the camera scan shows you how much was there. Call (972) 284-1392 to book.
If it’s original, likely yes. Valley Ranch’s 1980s zero-clearance inserts are reaching end of rated service life, and we regularly find cracked factory flues venting into wall cavities. The fireplace may still light, which misleads homeowners into thinking it’s safe. We camera-scan the full flue path and show you the joint condition before recommending replacement or repair. Insert replacement in Irving runs $1,800-$3,400 with a written warranty. Call (972) 284-1392 for an exact quote.
Yes. Our NFPA 211 Level 2 camera inspection enters the flue and smoke chamber to document separation, cracking, or spalling that indicates foundation movement. In a 1979 Valley Ranch ranch home, our tech pulled the original smoke chamber panel and found the firebox floor had separated from the foundation by three-quarters of an inch - invisible from the living room. The homeowner had assumed the fireplace was fine because they only burned a few DuraFlame logs a year; the camera sweep also showed Stage 2 glazed creosote on the clay-tile flue liner from the last owner’s habits. We documented both on video before recommending a HeatShield resurfacing and a new damper, and the homeowner approved the work while watching the footage on our tablet. No wall demolition needed for diagnosis.
A uniformed, background-checked technician arrives at your Irving home with a text notification when they’re en route. We perform an NFPA 211 Level 2 camera-scan inspection of the full flue, firebox, and smoke chamber, document findings with photos and video, and deliver a written price, written scope, and written warranty before any work begins. The visit includes a photo record archive under Haven Standard Clause 4, and all work is backed by our 365-Day Done Right Promise. Call (972) 284-1392 to schedule - estimates are free.
Written by Corrine Halstead, Owner at Level Two Chimney Dallas, serving Irving since 2009.