Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Grapevine, TX
A Level 2 chimney inspection and cleaning in Grapevine typically runs $189-$289 for a standard sweep with camera documentation, with most holiday-readiness bookings scheduled in October and early November before the city’s Christmas season begins. We’re Level Two Chimney Co., and our crews work Grapevine homes built during the 1980s-2000s suburban boom, where zero-clearance prefab fireplaces outnumber masonry systems and long idle periods create different problems than heavy creosote. Call (972) 284-1392 to book a sweep with written price before work starts.
Why Grapevine Homes Are Different
Grapevine’s housing stock sits in two distinct eras. The bulk of homes went up between the mid-1980s and early 2000s, when DFW corridor development favored builder-grade zero-clearance prefabricated metal fireplaces - factory-built units with specific insert and liner inspection needs and shorter service lifespans than masonry. The Historic District near Main Street holds a smaller stock of late-1800s to early-1900s masonry chimneys, some still running unlined or clay-tile-lined flues.
North Texas expansive clay soils shift dramatically with wet-dry cycles, stressing chimney foundations and mortar joints even on 1990s homes. Technicians routinely find cracked crowns and spalled mortar here that would be considered nearly new in other regions. Grapevine averages only 35-40 realistic wood-burning days yearly, so moisture intrusion and animal entry during 10-11 months of dormancy cause more damage than combustion byproducts.
The city’s identity as the “Christmas Capital of Texas” creates a concentrated pre-holiday rush. Residents who’ve ignored their fireplace since last December suddenly need activation inspections before hosting. That cultural pressure doesn’t exist at the same scale in neighboring Southlake or Colleyville.
Our Main Grapevine Services
Most calls we field from Grapevine homeowners fall into three categories. Here’s where each lives on our site.
Chimney Cleaning & Sweep in Grapevine
Our standard visit for Grapevine homes includes NFPA 211 Level 2 camera inspection, sweep, and documented photo record - essential for prefab units that sat idle through spring and summer. We check for moisture damage, debris, and animal nesting that accumulate during long off-seasons. Chimney Cleaning & Sweep in Grapevine
Chimney Repair in Grapevine
Clay soil movement and freeze-thaw cycling crack crowns and spall mortar on Grapevine chimneys within 15-25 years of construction. We quote crown rebuilds, tuckpointing, and structural repairs in writing before any work begins. Chimney Repair in Grapevine
Fireplace Services in Grapevine
Prefab fireplace inserts in Grapevine’s 1980s-2000s stock require specific clearances and liner compatibility checks that differ from masonry service. We handle insert swaps, gas conversions, and factory-built system repairs with documentation. Fireplace Services in Grapevine
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Grapevine
Most Grapevine chimneys were built during the DFW suburban boom with concrete crowns that crack within 15-20 years due to expansive clay soil movement and North Texas temperature swings. A failed crown lets water saturate the chimney structure during Grapevine’s long off-seasons, and without a proper cap, squirrels and birds nest in flues that haven’t seen smoke since last December. Chimney Cap & Crown work is our most common repair call from Grapevine’s 1990s neighborhoods.
Crown Repair
Signs you need it
Hairline cracks in the concrete slab at your chimney top, pieces of mortar collecting in the firebox, or water stains on the ceiling near the fireplace after spring rains.
What it costs in Grapevine
Crown repair typically runs $450-$850 depending on crack extent and chimney accessibility.
How we do it
We grind out cracked concrete, apply bonding agent, pour new crown with proper drip edge and slope, then document with photos before and after under Haven Standard Clause 4.
Cap Installation
Signs you need it
Twigs or nesting material in the flue, rain dripping into the firebox, or visible rust on prefab metal chimney chase covers.
What it costs in Grapevine
Single-flue cap installation ranges $180-$340; multi-flue caps or custom chase covers run $380-$720.
How we do it
We measure flue dimensions on site, fabricate or source stainless steel or copper cap with mesh screening, secure with proper fasteners for wind rating, and photo-document fit and finish.
What Chimney Cap & Crown Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Crown repair | $450 - $850 |
| Single-flue cap installation | $180 - $340 |
| Multi-flue cap / chase cover | $380 - $720 |
How long does a crown repair last in Grapevine?
A properly poured concrete crown with correct slope and overhang lasts 20-30 years even with North Texas clay soil movement. We warranty our crown work under the 365-Day Done Right Promise and document condition at each annual inspection.
Can I wait until after the holidays to fix a cracked crown?
If the crack is minor and no water is entering the firebox, we may recommend monitoring with a camera inspection; if water intrusion is active, delaying risks freeze-thaw damage through Grapevine’s winter temperature swings. Call (972) 284-1392 and we’ll show you the camera footage so you can decide.
Chimney Liner & Rebuild in Grapevine
Grapevine’s 1980s-2000s prefab fireplaces often reach end-of-service-life with original factory liners compromised by moisture and thermal cycling, while Historic District masonry chimneys may still contain unlined or failed clay tile that doesn’t meet current NFPA 211 standards. Clay soil movement accelerates liner separation and mortar joint failure even in relatively young chimneys. Chimney Liner & Rebuild work requires camera documentation to determine whether partial repair or full replacement is necessary.
Stainless Steel Liner
Signs you need it
Visible gaps or separations in clay tile when viewed with chimney camera, pieces of tile in the firebox, or a prefab unit with warped or rusted factory liner.
What it costs in Grapevine
Stainless steel liner installation ranges $1,800-$3,200 for typical residential flues.
How we do it
We measure flue dimensions with camera and laser, source properly sized 316Ti stainless steel liner with insulation blanket, drop and connect to appliance, then pressure-test and photo-document all joints.
Partial Rebuild
Signs you need it
Spalled brick above the roofline, leaning chimney stack, or mortar joints eroded to finger-width gaps.
What it costs in Grapevine
Partial rebuild from the roof up typically runs $2,400-$4,800 depending on height and brick matching.
How we do it
We scaffold to work height, remove damaged courses to sound masonry, lay matching brick with proper bond and weep holes, install new crown and cap, and deliver before-and-after photo record.
What Chimney Liner & Rebuild Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Stainless steel liner | $1,800 - $3,200 |
| Partial rebuild (roof up) | $2,400 - $4,800 |
| Full chimney rebuild | $6,500 - $12,000 |
Does my 1995 prefab fireplace need a new liner?
Factory-built units typically have 15-25 year service lifespans; we camera-inspect to determine if the original factory liner is intact or if replacement is safer. Call (972) 284-1392 for a free camera inspection with written findings.
How do I know if I need partial rebuild or full rebuild?
Camera inspection and exterior assessment determine how far damage extends below the roofline; if the stack leans or footing is compromised, full rebuild may be necessary. We show you the footage and quote both options in writing before any work.
Brands We Service in Grapevine
We stock and install caps, liners, and repair materials from HeatShield, Gelco, Olympia Chimney, and Famco through our Haven buying network, with most Grapevine jobs completed in one visit once parts are confirmed. our brands
Pricing for Chimney Cleaning in Grapevine, TX
| Service | Typical range in Grapevine |
|---|---|
| Standard chimney sweep with Level 2 inspection | $189 - $289 |
| Level 2 inspection only (no sweep needed) | $149 - $219 |
| Single-flue cap installation | $180 - $340 |
| Multi-flue cap / chase cover | $380 - $720 |
| Crown repair | $450 - $850 |
| Stainless steel liner installation | $1,800 - $3,200 |
| Partial rebuild (roof up) | $2,400 - $4,800 |
| Full chimney rebuild | $6,500 - $12,000 |
Prices increase with chimney height above single-story, difficult roof access, or matching specialty brick in Grapevine’s Historic District. Every job gets a written price before work starts - no exceptions, per Haven Standard Clause 1.
Neighborhoods We Serve in Grapevine
Our crews work across Grapevine’s full residential footprint, from the established subdivisions near Lake Grapevine to the newer infill near Highway 114. Dispatch is coordinated from our Dallas-Fort Worth office, with appointments typically available within 3-5 business days during off-peak months and 7-10 days during October-November holiday rush.
- Silver Lake
- Timberline
- Grapevine Historic District
- Glade Crossing
- Wildflower Estates
Service Area - Cities Near Grapevine
We serve homeowners throughout the northern Dallas-Fort Worth corridor, with regular appointments in Lewisville, TX, Carrollton, TX, Grand Prairie, TX, and Dallas, TX. All nearby cities receive the same written-price guarantee and documented photo record on every visit.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Grapevine
Most chimney repairs and liner replacements require a Grapevine building permit; we pull permits as part of our standard process and include the cost in your written quote. Historic District properties may have additional design review for exterior-visible work.
We recommend scheduling by mid-October for pre-holiday readiness; our calendar compresses significantly once the city’s Christmas Capital events begin in early November. Call (972) 284-1392 to hold your preferred date.
Yes - we work in HOA communities throughout Grapevine and can provide certificate of insurance and written scope documentation required by most associations. We coordinate access gates and parking with your property manager if needed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"Clean, careful, put down sheeting, and the fireplace works properly for the first time since we moved in."
- Yvette S."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.